Toshiba e-Studio332s - Network Connection Problems; Usb Connection Problems

Other Issues
-148-
Network Connection Problems
 Common to Windows and Mac OS X
 For Windows
USB Connection Problems
 Common to Windows and Mac OS X
Cause Remedy Reference
The Job Type of "Secure Print", "Store to
HDD" and "Encrypted Secure Print" are
unselectable on the e-STUDIO403S.
For Windows PCL Driver
1.Click [Start] > [Devices and Printers].
2.Right-click the [TOSHIBA e-STUDIO403S(PCL)]
icon and select [Printer properties]. (If you have
installed multiple printer drivers, select [Printer prop-
erties] > [TOSHIBA e-STUDIO403S(PCL)]).
3.Select the [Device Options] tab.
4.For the network connection, select [Get Printer
Settings].
For the USB connection, add a check to [ SD Memory Card ].
5.Click [OK].
For Windows PS Driver
1.Click [Start] > [Devices and Printers].
2.Right-click the [TOSHIBA e-STUDIO403S(PS)] icon
and then select [Printer properties]. (If you have
installed multiple printer drivers, select [Printer prop-
erties] > [TOSHIBA e-STUDIO403S(PS)].)
3.Select the [Device Settings] tab.
4.For the network connection, select [Get installed
options automatically] under [Installable Options],
and then click [Setup].
For the USB connection, select [Installed] for [SD
Memory Card] under [Installable Options].
5.Click [OK].
Advanced
Cause Remedy Reference
Using a crossover cable. Use a straight cable. -
The machine is turned on before a cable
was connected.
Connect cables before turning on the machine. P. 5 1
The hub and the machine are incompatible
or have some problem.
Press the <SETTING> key and select [Admin Setup] >
[Network Menu] > [Network Setup] > [HUB Link
Setting], and then select [10BASE-T HALF].
-
Cause Remedy Reference
IP address is incorrect. z Check that the same IP address is set for the machine
and the machine's port setting on the computer.
z If using LPR Utility, check the IP address setting in LPR
Utility.
P. 6 3
All pages are not printed. If you are using the WSD port, change it to the standard
TCP/IP port.
Cause Remedy Reference
Unsupported USB cable is being used. Use a USB2.0 cable. -
A USB hub is being used. Directly connect the machine to the computer. P. 5 9
Printer driver is not installed correctly. Reinstall printer driver. P. 5 9