Toshiba e-STUDIO347CS - Making Copies; Basic Copying Procedure

HOW TO MAKE COPIES
- 28 -
1
2
3
4
5
6
1
Align the side guides to the original length.
2
Insert the original with its face up and
straight along the side guides.
The original is automatically pulled in and then the menu
of step 3 will be displayed on the touch panel.
Note
• Be sure to let go of the original when it starts being
pulled.
3
If there is another original, insert it in the
same way.
4
After all the originals are pulled in, press
[JOB FINISH].
Memo
• If you want to stop copying, press [JOB CANCEL].
Making Copies
Basic copying procedure
Make copies following the procedure below.
1
Make sure that paper is placed in the
drawer(s).
For the types and sizes of acceptable paper and how to
place it.
2
Place the original(s).
For the types and sizes of originals and how to place
them, see the following pages:
 P.25 "Acceptable originals"
 P.26 "Using the RADF (Reversing Automatic
Document Feeder)"
 P.25 "Placing originals on the original glass"
 P.26 "Book-type originals"
3
Key in the desired number of copies if you
want more than one copy.
Press the [CLEAR] button on the control panel to delete
the number keyed in.
4
Select the copy modes as required.
 P.40 "BASIC COPY MODES"
2
1
534