e-STUDIO350/450 AUTOMATIC DUPLEXING UNIT 14 - 16 November 2003 © TOSHIBA TEC
14
[M] Upper transport roller
(1)
Take off the ADU, ADU inside rear cover , ADU
opening / closing switch, paper guide, and ADU
cover ( Chapter 14.5 [A] to 14.5 [E]).
(2) Remove 2 screws
and take off the opening /
closing lever.
(3) Remove the spring.
(4) Remove the screw and release the rear latch.
(6) Loosen 1 setscrew and take off the ADU
clutch.
Fig. 14-521
Fig. 14-522
Fig. 14-523
Fig. 14-524
Spring
Screw
Rear latch
Setscrew
ADU clutch
Screw
Opening /Closing lever
To Next Page
Loading...
