Registering User Groups and Templates 235
9
Press the [USER NAME] button, and then enter the user name of
the template as required.
y When the [USER NAME] button is pressed, the letter entry menu ( P. 4 1 ) i s d i s -
played. Up to 30 letters can be entered.
To set the password, proceed to step 10. If not, skip to step 12.
10
Key in the password in “Password” as required, and then press the
[SET] button.
y Be sure to key in the 5-digit password.
y * (asterisk) is displayed in “Password” when the password is entered.
y To correct the entered password, press the [CLEAR] button on the control panel.
y When the [SET] button is pressed, “Retype Password” becomes highlighted.
To Next Page
Loading...
