290
14.SPECIFICATIONS & OPTIONS
14
1. e-STUDIO3511/4511 SPECIFICATIONS
Model Name FC-3511/FC-4511
Type Desktop type
Original Glass Fixed
Printing (Copying) System Indirect electrophotographic method
Developing System 2-component magnetic brush developing
Fixing Method Heat roller + belt fusing (Twin separated IH coil)
Photosensor Type OPC
Original Scanning System Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Original Scanning Sensor Linear CCD sensor
Scanning Light Source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing Black-and-white: 2,400 dpi x 600 dpi (Smoothing process), 1 bit
Colour, Image smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable Originals Sheets, books and 3-dimensional objects
Acceptable Original Size Max. A3
Acceptable
Copy Paper
Size
Drawer A3, A4, A4-R, A5-R, B4, B5-R, FOLIO, 8K, 16K, 16K-R, LD, LG, LT, LT-R,
ST-R, COMP, 13”LG, 8.5” SQ
Bypass Paper size within 100-305 mm (Length), 148-457 mm (Width)
Acceptable
Copy Paper
Weight
Drawer
64-105 g/m
2
Bypass
64-209 g/m
2
Warm-up Time Approx. 40 seconds
First Copy Time Black-and-white: Approx. 6.8, Colour: 16.2 seconds or less
Continuous Copy Speed See “Continuous Copy Speed”.
Multiple Copying Up to 999 copies (digital key entry)
Excluded
Image Width
Black-and-
white
Leading edge: 3.0±2.0 mm, Trailing edge: 3.0±2.0 mm,
Both edge: 2.0±2.0 mm
Colour Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer
(Black-and-
white/Colour)
Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Reproduction Ratio Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)
To Next Page
Loading...
