1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
1-34
Adjustment of tilted images on the leading/trailing edge
• Example of phenomenon
The image on the leading and trailing edges is tilted as shown below in the simplex mode.
When this tilted image is printed in the duplex mode, image positions on the front and back sides
become as shown below.
Move the fuser unit guide rail upward Move the fuser unit guide rail downward
The reproduction ratio in the secondary
scanning direction on the front side
becomes large.
The reproduction ratio in the secondary
scanning direction on the front side
becomes small.
Before
adjustment
After
adjustment
To Next Page
Loading...
