Toshiba e-STUDIO353 - Adjustment of the Paper Feeding System; Sheet Sideways Deviation Caused by Paper Feeding

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 48
3.8 Adjustment of the Paper Feeding System
3.8.1 Sheet sideways deviation caused by paper feeding
<Procedure>
• The center of the printed image shifts to the
front side. → Move the guide to the front side
(Arrow (A) direction in the lower figure).
• The center of the printed image shifts to the
rear side. → Move the guide to the rear side
(Arrow (B) direction in the lower figure).
Fig. 3-43
Fig. 3-44
• Bypass feeding • Drawer feeding
Fig. 3-45
Fig. 3-46
Feeding direction
Center
[
Rear
]
[
Front
]
Feeding direction
Center
[
Rear
]
[
Front
]
(A) (B)
(A)
(B)
05/07