Toshiba e-STUDIO353 - Page 75

2 - 55
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-658
(4) Disconnect 2 connectors.
Fig. 2-657
(3) Remove 2 screws and take off the cover.
Fig. 2-659
(5) Loosen 2 screws and take off the cover.
Fig. 2-660
(6) Remove 1 screw.
(7) Lift up the job separator and release the
hook. Take off the job separator toward the
front.