4
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
BACKUP FUNCTION
4 - 7
[B] Restoring procedure
(1) Shut down the equipment.
(2) Connect the USB media to the USB port on the right upper cover.
Fig. 4-7
Note:
Restoring cannot be performed with multiple USB medias connected simultaneously.
(3) Turn the power ON while pressing the [5] and [9] buttons simultaneously.
A screen for selecting items to restore is displayed. Select the number (any of “2”, “4” and “6” for
the item to be restore, and then press the [START] button.
Fig. 4-8
Notes:
• It may take some time for the next screen to appear after you key in the number for the item.
• The screen above is not displayed if the data cloning function is disabled.In this case, ask the
user (machine administrator) to enable the data cloning function on the TopAccess menu.
Number Restore Item
2: User Data Restore Restoring up User data
4: Setting Restore Restoring up Setting item
6: SRAM Data Restore Restoring up SRAM data
USB port
USB media
To Next Page
Loading...
