© TOSHIBA TEC CORPORATION 2012 All Rights Reserved.
7
UNPACKING (1) II-1. e-STUDIO206L/256/306/356/456
Sub Menu
Have 2 service technicians hold the 2 grips at the paper exit side and the 2 handles at the
paper feed side of the e-STUDIO. Gently place the e-STUDIO on the desk fitting the
positioning pins of the desk into the slots of the e-STUDIO.
* Place the e-STUDIO so that its front is aligned to that of the desk.
II. UNPACKING AND SETUP
To Next Page
Loading...
