2 PRINTING FROM WINDOWS
90 Setting Up Print Options
7) Hold Print Restriction
Select this check box to enable the Hold Print Restriction function.
For details and setting of the Private Print Restriction function and Hold Print Restriction function, refer
to the TopAccess Guide.
After you adjust settings in the [Account Settings] dialog box, make sure to confirm that the settings
have been changed as specified in the printing preferences dialog box, accessing from the [File] menu
> [Printing Preferences]. You can also confirm that the settings have been changed as specified on the
properties page of the printer driver when you print documents from applications.
These functions below are available only when the hard disk is installed in the equipment.
- Private Print Restriction
- Hold Print Restriction
Setting up LDAP servers
The [LDAP Server Settings] dialog box allows you to register LDAP servers.
1) Server Name
Enter the desired LDAP server in this box if needed.
Up to 64 characters (excluding # ; \ =) can be entered for the [Server Name] box.
2) [Add]
Click this button to register the LDAP server in the [Server Name List], which has been entered in the
[Server Name] box.
3) Server Name List
The registered LDAP servers are displayed in this list. Up to 16 LDAP servers can be registered.
4) [Delete]
Click this button to delete an LDAP server in [Server Name List]. Select the LDAP server that you want to
delete in the list, and click this button.
To Next Page
Loading...
