1 Top 229 mm (9 in.)
2 Right side 178 mm (7 in.)
3 Front 508 mm (20 in.)
4 Left side 127 mm (5 in.)
5 Rear 101.6 mm (4 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding three optional 550‑sheet trays.
Learning about the printer 10
To Next Page
Loading...
