Toshiba e-STUDIO400P - Cover Pages

3 PRINTING FROM Macintosh
140 Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.6.x
Cover Pages
In the Cover Pages menu, you can set Front Cover printing and Back Cover printing.
This option menu cannot be set when the Cover Page option for sending a print job with a banner page is enabled.
1) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a different drawer or the
bypass tray.
To enable cover printing, select this check box and select the location from where a cover sheet is to be fed and the
print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto(Default)] is selected, the paper is automatically selected
according to the printed document size.
The selectable values in the [Source] box vary depending on the optional devices installed on this equipment and
their configuration on the Paper Feed menu.
Print Style
This selects how to print the cover.
- Do not print on page
— Select this to insert a blank cover.
- Print on page — Select this to print the first page image on the front side of a cover. When the Two-Sided Printing
option is enabled in the Layout menu, the first two page images are printed on both sides of a cover.
- Print on 1 side of the page — Select this to print the first page image on the front side of a cover. This is available
only when the Two-Sided Printing option is enabled in the Layout menu.
2) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed from a different drawer or
the bypass tray.
To enable back cover printing, select this check box and select the location from where a back cover sheet is to be fed
and the print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto (Default)] is selected, the paper is automatically selected
according to the printed document size.
1
2