Toshiba e-STUDIO4500c - Page 613

August, 2006 SERVICE PROGRAM TABLES
5-121
013 Login MAX
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
5840 IEEE 802.11b (Not Used)
006 Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth
setting varies for different countries.
[1~14/1]
007 Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
bandwidth setting varies for different countries.
[1~14/1]
011 WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
[0~1/1]
0: If the initiator receives another login request while logging in, the request is
refused.
1: If the initiator receives another login request while logging in, the request is
refused and the initiator logs out.
Note: Displayed only when the wireless LAN card is installed.
5841 Supply Name Setting
Press the User Tools key. These names appear when the user presses the
Inquiry button on the User Tools screen.
001
Toner Name Setting: Black
002
Toner Name Setting: Cyan
002
Toner Name Setting: Yellow
004
Toner Name Setting: Magenta
011
StapleStd1
012
StapleStd2 Standard Staples for B706
013
StapleStd3 Standard Staples for B700/B701
021
StapleBind1
022
StapleBind2 Booklet Staples for B700
023
StapleBind3
5842 Net File Analysis Mode Setting DFU
Bit
Groups
0 System & other groups (LSB)
1 Capture related
2 Authentication related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
This is a debugging tool. It sets
the debugging output mode of
each Net File process.
Bit SW 0011 1111
6 Repository related