Toshiba e-STUDIO4500c - Page 627

August, 2006 SERVICE PROGRAM TABLES
5-135
6104
Punch Hole Reg 2 Punch Hole Control
This SP determines whether the finisher entrance roller stops to correct skew when
paper enters the finisher.
001
A3 SEF
002
B4 SEF
003
A4 SEF
004
A4 LEF
005
B5 SEF
006
B5 LEF
007
DLT SEF
008
LG SEF
009
LT SEF
010
LT LEF
011
12" x 18"
012
Custom Size
[0~2/1]
0: No adjustment. Quickly restores the default setting of you
forget what the other settings do.
0: Paper stops for skew correction
1: Paper does not stop
2: Paper stops (same as default)
6105
Fine Adj Staple Fine Adjust Staple Jogger Fence Postion
This SP corrects the distance between the jogger fences and the sides of the stack
on the finisher stapling tray.
001
A3 SEF
002
B4 SEF
003
A4 SEF
004
A4 LEF
005
B5 SEF
006
B5 LEF
007
DLT SEF
008
LG SEF
009
LT SEF
010
LT LEF
011
12"x18"
012
Custom Size
[-15~+15/0.5 mm]
+ Value: Increases distance between jogger fences and the
sides of the stack.
- Value: Decreases the distance between the jogger fences
and the sides of the stack.
6106
Fine Adj Out Jog Fine Adjust Output Jogger Unit Fences
This SP corrects the distance between the jogger fences and the sides of the stack
when the output jogger unit attached to the side of the machine jogs sheets as they
exit the finisher.
+ Value: Increases distance between jogger fences and the sides of the stack.
- Value: Decreases the distance between the jogger fences and the sides of the
stack.
001
A3 SEF [-15~+15/0.5 mm]
002
B4 SEF
003
A4 LEF
004
B5 LEF
005
DLT SEF [-15~+15/0.5 mm]
006
LT LEF [-15~+15/0.5 mm]
007
Custom [-15~+15/0.5 mm]