Toshiba e-STUDIO477SL - Page 241

APPENDIX
- 241 -
2
1
3
4
5
6
7
Note
• WIRELESS SETTINGS are printed only when the Wireless LAN Module is installed.
COMM. REPORT - RELAY ORIGINATOR Shows the conditions for printing a relay originator
report.
NO
COMM. REPORT - RELAY STATION Shows the conditions for printing a relay station
report.
NO
COMM. REPORT - RELAY DESTINATION Shows the conditions for printing a relay destination
report.
NO
RECEPTION LIST - LOCAL Shows whether a reception list will be printed or not
after reserving a document to a mailbox within the
equipment.
NO
RECEPTION LIST - REMOTE Shows whether a reception list will be printed or not
after reserving a document to a mailbox within the
equipment remotely from another facsimile.
NO
RECEPTION LIST - RELAY STATION Shows whether a reception list will be printed or not
after receiving a relay transmission from an
originator as a relay hub.
NO
PRINTER/E-FILING
Function Description User
AUTOMATIC CHANGE OF PAPER SOURCE Shows whether the Automatic Change of Paper
Source function is enabled or disabled.
NO
PAPER OF DIFFERENT DIRECTION Shows whether the Paper of Different Direction
function is enabled or disabled.
NO
ENFORCEMENT CONTINUE OF ILLEGAL PAPER Shows whether the Enforcement Continue of Illegal
Paper function is enabled or disabled.
NO
AUTO EXIT TRAY CHANGE (CASCADE PRINT) Shows whether the Auto Exit Tray Change (Cascade
Print) function is enabled or disabled.
NO
SUSPEND PRINTING IF STAPLER EMPTY Shows whether this equipment suspends printing
when stapler empty occurs.
NO
WIRED 802.1X SETTING
Function Description User
ENABLE 802.1X Shows whether the wired 802.1X authentication is
enabled or disabled.
NO
EAP-METHOD Shows the current EAP-method. NO
WIRELESS SETTINGS
Function Description User
WIRELESS LAN Shows whether the Wireless LAN function is enabled
or disabled.
NO
NETWORK SETTING - GENERAL PRODUCT - GENERAL
Function Description User
ETHERNET SPEED DUPLEX MODE Shows the Ethernet speed setting. NO
NETWORK SETTING - NETWORK - TCP/IP
Function Description User
ADDRESS MODE Shows the TCP/IP address mode. NO
REPORT SETTING
Function Description User