1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
1-37
e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC
Procedure
Tilt the laser optical unit (LSU).
Explanation of the portions used for adjustment
[1] LSU holder
[2] Frame
[3] The screw hole to use when adjusting the titled volume
[4] The scale to use when adjusting the tilted volume (LSU holder side)
[5] The scale to use when adjusting the tilted volume (frame side)
[6] The screw hole to use when the value of “A-B” is +0.5 mm (“+0.5” is marked)
[7] The screw hole to use when the value of “A-B” is -0.5 mm (“-0.5” is marked)
Move the frame [2] to the right Move the frame [2] to the left
The writing start position on the front side is
moved to the leading edge side.
The writing start position on the front side is
moved to the trailing edge side.
Before
adjustment
After
adjustment
To Next Page
Loading...
