Toshiba E-STUDIO520 - Relation between the Equipment State and Operators Operation

5
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 CONTROL PANEL
5 - 9
5.3 Relation between the Equipment State and Operator’s
Operation
During READY
status
During warming-up
Auto job start
reserved
Scanning original/
Scanning original
and
printing out the
copy
Press [ENERGY
SAVER] button
Switches to energy
saving mode
Display not changed Display not changed Display not changed
Press [ACCESS]
button
Displays depart-
ment code entry
screen
(when department
management is
available)
Displays depart-
ment code entry
screen
(when department
management is
available)
Display not changed Display not changed
Press
[JOB STATUS]
button
Displays print job list
screen
Display not changed Display not changed Displays print job list
screen
Press
[INTERRUPT]
button
Switches to
interrupt mode
Display not changed Display not changed Display not changed
(LED blinking)
Press [FUNCTION
CLEAR]
button after setting
the copy mode
Copy mode is
cleared after the
copy mode is set
Copy mode is
cleared after the
copy mode is set
Auto job start can-
celled
Display not changed
Press [STOP] button Display not changed Display not changed Auto job start
cancelled
Scanning or printing
out stops, and
“READY Press
START to copy” and
“MEMORY CLEAR”
are displayed
Press [CLEAR]
button after setting
the copy mode
Number of printouts
changes to 1 while
the setting remains
unchanged after the
copy mode is set
Number of printouts
changes to 1 while
the setting remains
unchanged after the
copy mode is set
Display not changed Display not changed
Press [CLEAR]
button after keying
in numbers
(digital keys)
Number keyed in
changes to 1 after
being entered
Number keyed in
changes to 1 after
being entered
Display not changed Display not changed
Press
[MONITOR/PAUSE]
Display not changed Display not changed Display not changed Display not changed
Press [FAX] button Displays FAX
screen
Display not changed Display not changed Display not changed
Press [COPY]
button
Display not changed Display not changed Display not changed Display not changed
Press [SCAN]
button
Displays SCAN
screen
Display not changed Display not changed Display not changed
Press [e-FILING] Displays e-FILING Display not changed Display not changed Display not changed
Press [EXTENSION]
button
Display not changed Display not changed Display not changed Display not changed
Press [TEMPLATE]
button
Displays TEM-
PLATE screen
Display not changed Display not changed Display not changed
Press [USER
FUNCTIONS] button
Displays USER
FUNCTIONS screen
Display not changed Display not changed Display not changed
Press [HELP] button Displays HELP
screen
Displays HELP
screen
Display not changed Display not changed