1
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 3
e-STUDIO850
*1 : The 3rd drawer and 4th drawer are standard equipments for NAD, SAD and TWD (e-STUDIO600/
720) versions.
*2 : The Tandem LCF is a standard equipment for ASD, ASU, AUD, MJD, CND, TWD (e-STUDIO850)
and KRD versions. Only A4/LT can be used for the Tandem LCF.
*3 : Only A4, B5 and LT can be used for the Option LCF.
* Each copy speed has been measured in the Continuous Copy Mode, using single-sided originals
placed on the original glass manually.
* Accuracy: Within ±2 sheets (Bypass feed) / Within ±1 sheet (Other paper sources)
* A hyphen ("-") indicates that the combination is invalid for the subject paper source.
* Values may vary depending on its use condition and environment.
* When the RADF is used, each copy speed per minute of e-STUDIO520/600/720/850 has reached
52/60/72/85 sheets. These copy speeds can be realized only in the following conditions.
• Original: A4/LT / 1 sheet
• Copy mode: A4/LT / Plain paper / Automatic Paper Selection - OFF / Automatic Copy Density -
OFF
• Number of copy set: 52 or more / 60 or more / 72 or more / 85 or more
• Reproduction ratio: 100%
Paper size
Drawer
Tandem
LCF(*2)
Bypass feed
Option
LCF(*3)
1st 2nd
3rd
(*1)
4th
(*1)
Size
specified
Size not
specified
A4, B5,
A5-R, LT,
ST-R
Top side
discharging
85 85 85 85 85 50 34 85
Back side
discharging
85 85 85 85 85 50 34 85
A4-R,
B5-R, LT-R
Top side
discharging
61 61 61 61 - 42 34 -
Back side
discharging
56 56 56 56 - 42 34 -
B4, FOLIO,
LG,
COMPUTER
Top side
discharging
52 52 52 52 - 38 34 -
Back side
discharging
45 45 45 45 - 38 34 -
A3, LD Top side
discharging
43 43 43 43 - 34 34 -
Back side
discharging
37 37 37 37 - 34 34 -
To Next Page
Loading...
