Toshiba E-STUDIO520 - 10 Process Related Section; Construction

10
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 PROCESS RELATED SECTION
10 - 1
10. PROCESS RELATED SECTION
10.1 Construction
This chapter describes the following unit regarding the image forming process.
• Main charger
• Charger wire cleaner
• Discharge LED
• Ozone filter
• Surface potential sensor
• High-voltage transformer
• Temperature/Humidity sensor
The drum/cleaner unit is described in chapter 11, the developer unit is described in chapter 12 and the
transfer/transport unit is described in chapter 13.
Fig.10-1
Discharge LED
Main charger
Charger wire cleaner
Drum surface
potential sensor
Drum