Toshiba E-STUDIO520 - Page 226

e-STUDIO520/600/720/850 PROCESS RELATED SECTION March 2005 © TOSHIBA TEC
10 - 10
(6) Take off 2 fingers and then the rear terminal
cover.
Fig.10-9
(7) Pull up the terminal, remove the spring and
release the hook on the rear side to take off
the charger wire.
Fig.10-10
(8) Remove 1 screw and take off the cleaning
pad.
Fig.10-11
Latch
Terminal cover
Charger wire
Spring
Terminal
Cleaning pad
Screw