Toshiba E-STUDIO520 - Page 283

13
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 TRANSFER/TRANSPORT UNIT
13 - 7
[B] Transfer belt
Note:
When installing the transfer unit, make sure
that the lever comes under the cam.
Fig.13-6
(1) Take off the transfer unit.
( P.13-6 "[A] Transfer unit")
(2) Turn the transfer belt unit 90º and pull it out
upward.
Fig.13-7
(3) Remove 2 screws.
Fig.13-8
Lever
Cam
Transfer belt unit
Transfer unit
Link plate
Screw
Screw