Toshiba E-STUDIO520 - Page 319

14
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 FUSER UNIT
14 - 29
[K] Web motor (M4) / Fuser transport sensor (S9)
(1) Take off the fuser unit
( P.14-18 "[B] Fuser unit").
(2) Take off the cleaning web unit
( P.14-19 "[C] Cleaning web unit / Clean-
ing web").
(3) Remove 2 screws to take off the fuser unit
front cover.
Fig.14-42
(4) Remove 2 screws and open the lower sepa-
ration finger unit.
Fig.14-43
(5) Release the clamp and disconnect 1 connec-
tor.
(6) Remove 2 screws and take off the web
motor.
Fig.14-44
Fuser unit front cover
Lower separation finger unit
Web motor