Toshiba E-STUDIO520 - Disassembly and Replacement

15
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 EXIT/REVERSE SECTION
15 - 11
15.7 Disassembly and Replacement
[A] Exit/Reverse unit
[B] Reverse section cooling fan-1 [M24] / Reverse section cooling fan-2 [M25]
(1) Take off the left lower cover (= exit cover)
( P.2-46 "[J] Left lower cover (Exit cover)").
(2) Open the exit/reverse unit and remove 1
screw.
Fig.15-8
(3) Disconnect 1 connector. Then take off the
exit/reverse unit by lifting it up.
Fig.15-9
(1) Take off the left lower cover (= exit cover)
( P.2-46 "[J] Left lower cover (Exit cover)").
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-1.
(3) Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-2.
Fig.15-10
Exit/Reverse unit
Exit/Reverse unit
Reverse section cooling fan-2
Reverse section cooling fan-1