Toshiba E-STUDIO520 - Page 340

e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF) March 2005 © TOSHIBA TEC
16 - 4
3) Read motor (M36) rotating in reverse (seen in front)
Fig.16-5
4) large original exit motor (M39) rotating in reverse (seen in front)
Fig.16-6
Rear
Read motor
Read roller
Front
Large original
exit roller
Large original exit motor
Read motor rotates
counterclockwise to
transport, scan and
discharge originals.
Large original exit motor
switches to the backside
of an original by rotating
clockwise and registers
that side.
Intermediate transport roller
Intermediate
transport roller
Large original exit roller
Large original exit motor
Large original exit motor
rotates counterclockwise
to discharge and reverse
originals.
Small original exit motor
Small original exit motor
rotates clockwise to trans-
port and discharge originals.
Small original exit roller
Small original
reverse roller
Rear
Front
One-way pulley