16
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
16 - 7
16.5 Operations
16.5.1 A4 single-sided feeding (Operational condition: A4 original/
Reproduction ratio: 100%)
1) Original setting
The original empty sensor (S60) turns ON when the original has been set on the original feeding
tray.
Fig.16-10
2) Lifting of the lifting tray
The tray lift motor (M38) rotates to lift the tray after receiving the original feeding signal from the
engine. With a specified delay after the lifting tray upper limit detection sensor (S59) has detected a
top side of the original, the tray lift motor (M38) stops rotating.
Fig.16-11
To Next Page
Loading...
