e-STUDIO520/600/720/850 OUTLINE OF THE MACHINE March 2005 © TOSHIBA TEC
2 - 36
S48 CST4-BTM-SNR
4th drawer bottom sensor
Detecting the lowering status of the tray in
the 4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Fig.2-21 30-26
S49 CST4-EMP-SNR
4th drawer empty sensor
Detecting the presence of the paper in the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Fig.2-21 7-18
S50 CST4-TRY-SNR
4th drawer tray-up sensor
Detecting the lifting status of the tray in the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Fig.2-21 7-18
S51 CST4-TR-SNR
4th drawer transport sen-
sor
Detecting the paper transport at the paper
feeding system of the 4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Fig.2-21 7-18
S52 CST4-FEED-SNR
4th drawer feed sensor
Detecting the paper feeding status of the
4th drawer
(Only for JPD/NAD/SAD model of all equip-
ments and TWD model of e-STUDIO600/
720)
Fig.2-21 7-18
S53 DF-TRY-SNR
Original tray sensor
Detecting the length of the original set on
the original feeding tray
Fig.2-28 93-102
S54 DF-TRY-VR-SNR
Original tray width sensor
Detecting the width of the original set on
the original feeding tray
Fig.2-28 93-14
S55 DF-RGST-SNR
Original registration sensor
Detecting the transporting status of the
original at the registration roller section
Fig.2-28 91-103
S56 DF-SIZE-SNR1
Original width detection
sensor-1
Detecting the width of the original Fig.2-28 91-103
S57 DF-SIZE-SNR2
Original width detection
sensor-2
Detecting the width of the original Fig.2-28 91-103
S58 DF-SIZE-SNR3
Original width detection
sensor-3
Detecting the width of the original Fig.2-28 91-103
S59 DF-U-LMT-SNR
Lifting tray upper limit
detection sensor
Detecting the upper limit position of the
original lifting tray
Fig.2-29 81-29
S60 DF-EMP-SNR
Original empty sensor
Detecting the presence of the original set
on the original feeding tray
Fig.2-29 81-29
S61 DF-COV-SNR
Jam access cover sensor
Detecting the opening/closing status of the
jam access cover
Fig.2-29 81-29
S62 DF-L-LMT-SNR
Lifting tray lower limit
detection sensor
Detecting the lower limit position of the
original lifting tray
Fig.2-29 82-36
S63 DF-LENG-SNR
Original length detection
sensor
Detecting the length of the original Fig.2-29 82-31
S64 DF-APS-SNR
APS operation sensor
Switching ON/OFF of the APS sensor by
detecting the angle of the RADF
Fig.2-30 86-105
S65 DF-OPN-SNR
RADF opening/closing sen-
sor
Detecting the opening/closing status of the
RADF
Fig.2-30 89-101
S66 DF-SD-REV-SNR
Small original reverse sen-
sor
Detecting the transporting status of the
original at the small original reverse section
Fig.2-31 84-31
Symbol Name Function Remarks P-I
To Next Page
Loading...
