e-STUDIO520/600/720/850 OUTLINE OF THE MACHINE March 2005 © TOSHIBA TEC
2 - 52
2.7 Removal and Installation of Options
[A] Finisher
[B] Large Capacity Feeder (LCF)
(1) Shut down the equipment and unplug the
power cable.
(2) Take off the connector cover and unplug the
interface cable.
Fig.2-58
(3) Remove 1 screw and take off the finisher
from the slide rail.
Note:
When moving the finisher unit by itself, be
careful that it does not topple over.
Fig.2-59
(1) Shut down the equipment and unplug the
power cable.
(2) Press the button to separate the Large
Capacity Feeder (LCF) from the equipment.
Fig.2-60
Connector cover
Interface cable
Slide rail
To Next Page
Loading...
