© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 189
2
(4) Press the [ENTER] button to complete overwriting of the counter value.
Note: Note:
The screen returns to the code entry screen without copying (overwriting) the value when the
[CANCEL] button is pressed.
• Key in “2” to copy the value of the backup
counter (SYS board) (B) onto the value of
the total counter (LGC board) (A).
Fig. 2-5
(A) (B)
06/09
To Next Page
Loading...
