© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 3
2
E261 Paper transport jam Option LCF transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the Option LCF.
Ch.5.1.1
E2A1 Transport jam during duplex printing (paper not
reaching intermediate transport sensor): Paper
which has passed the reverse section and horizon-
tal transport section does not reach the intermedi-
ate transport sensor during duplex printing.
Ch.5.1.1
E300 3rd drawer transport jam (paper not reaching regis-
tration sensor): Paper which has passed the 1st
drawer transport sensor does not reach the regis-
tration sensor during the feeding at the 3rd drawer.
Ch.5.1.1
E301 3rd drawer transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the 3rd drawer.
Ch.5.1.1
E310 3rd drawer transport jam (paper not reaching 1st
drawer transport sensor): Paper which has passed
the 2nd transport sensor does not reach the 1st
drawer transport sensor during the feeding at the
3rd drawer.
Ch.5.1.1
E320 3rd drawer transport jam (paper not reaching 2nd
drawer transport sensor): Paper which has passed
the 3rd drawer / Tandem LCF transport sensor does
not reach the 2nd drawer transport sensor during
the feeding at the 3rd drawer.
Ch.5.1.1
E330 4th drawer transport jam (paper not reaching regis-
tration sensor): Paper which has passed the 1st
drawer transport sensor does not reach the regis-
tration sensor during the feeding at the 4th drawer.
Ch.5.1.1
E331 4th drawer transport jam (paper not reaching inter-
mediate transport sensor): Paper which has passed
the 1st drawer transport sensor does not reach the
intermediate transport sensor during the feeding at
the 4th drawer.
Ch.5.1.1
E340 4th drawer transport jam (paper not reaching 1st
transport sensor): Paper which has passed the 2nd
drawer transport sensor does not reach the 1st
drawer transport sensor during the feeding at the
4th drawer.
Ch.5.1.1
E350 4th drawer transport jam (paper not reaching 2nd
drawer transport sensor): Paper which has passed
the 3rd drawer / Tandem LCF transport sensor does
not reach the 2nd drawer transport sensor during
the feeding at the 4th drawer.
Ch.5.1.1
E360 4th drawer transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 4th drawer transport sensor
does not reach the 3rd drawer / Tandem LCF trans-
port sensor during the feeding at the 4th drawer.
Ch.5.1.1
E370 3rd drawer transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 3rd drawer / Tandem LCF
feed sensor does not reach the 3rd drawer / Tan-
dem LCF transport sensor during the feeding at the
3rd drawer.
Ch.5.1.1
Error code Classification Contents Troubleshooting
To Next Page
Loading...
