© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
FIRMWARE UPDATING
6 - 23
6
[D] Display during the update (When the FROM basic section software version to be updated is
"V1.04 / 2.38" or later)
Update is performed in parallel as shown in the transition diagram below.
Fig. 6-21
Below is an example of the changes of the LCD screen during update.
Select items to be updated and press the
[START] button.
Item Selection Screen for Update
1. OS UI Update
[
System ROM
]
3. PFC Firmware Update
4. Engine Firmware Update
Update Completed
[
Laser ROM
]
[
PFC ROM
]
[
Engine ROM
]
5. Scanner Firmware Update
[
Scanner ROM
]
2. LSR Firmware Update
Turn ON the power while [8] button and [9] button are pressed simultaneously
06/09
To Next Page
Loading...
