Toshiba E-STUDIO520 - Setting up the Equipment as an NDPS Object

2. Setting up Network Server
70 Network Administration Guide — Setting up NetWare Print Server
4. Click [Next] to proceed with installation. When the NDPS
Gateway and NetWare snap-in components have been
installed, you can configure the equipment as an NDPS
object.
— Setting up the equipment as an NDPS Object
Considerations and Limitations
This equipment should be automatically discovered by the TOSHIBA NDPS Gateway. If
not, manually create a new NDPS Printer Agent. ( P.71 "Create a Printer Agent")
Prerequisites
1. Load “NWADMN32.EXE” on the administrator workstation to
launch the NetWare administration program.
2. Determine the Tree or Context under which to install the
NDPS printer agent.
3. Verify that both a NDPS Manager and Broker object exist at
this level. If not, create them.
4. Add drivers to the NDPS Broker. They can then be selected
from the drivers list and associated with the Printer Agent.
Add Drivers to the NDPS Broker
1. Launch NWAdmin.
2. Double-click the Broker icon.
3. Click [Resource Management (RMS)].
4. Click [Add Resources].
5. Select the applicable system: the Windows 98/Me/2000, Win-
dows NT or Windows XP operating system. Click [Add].
6. Click [Browse] to locate the driver's .inf file on either the dis-
tribution CD-ROM or a shared network location.
7. Click [OK].
Now, when you create a Printer Agent, you can associate the drivers by
selecting them from the list of drivers managed by the broker.