2. Setting up Network Server
Network Administration Guide — Setting up LDAP Authentication Service 81
- Right-click a user that you want to enable the Kerberos authentication, and
select [Name Mappings...].
The [Name Mappings...] command does not displayed if you do not select
[Advanced Features] in the [View] icon.
- Enter “user name”+@+”domain name” in the field. For “user name”, enter the
full name of the selected user.
5. When the IP address is assigned using DHCP, enable “006 DNS Servers” and “015
DNS Domain Name” in the DHCP Server’s Scope Options or Server Options.
To Next Page
Loading...
