4.EDITING FUNCTIONS
Cover Sheet 105
4 EDITING FUNCTIONS
y When placing paper for cover sheets in a drawer, set the paper type (“COVER”), size and thickness for the
drawer.
P.18 “Setting paper type”
y When placing paper for cover sheets on the bypass tray, set the size and thickness.
P.36 “Bypass Copying”
y Place the paper for cover sheets of the same size as normal paper in the same direction.
2
Place the normal paper in the drawer(s).
3
Place the original(s).
When placing them on the original glass, they must be placed from the first page.
4
Press [COVER SHEET] on the EDIT menu.
5
Select the desired cover sheet mode.
When you select [TOP COPIED] or [TOP COPIED BACK BLANK] and [1->2 DUPLEX] (duplex copying)
together, the front cover will be a 1-sided copy.
To Next Page
Loading...
