e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 14
[B] LCD inverter board (INV-LCD)
[C] DSP board (DSP)
(1) Take off the control panel unit.
P.5-12 "[A] Control panel unit"
(2) Remove 2 screws and disconnect 2
connectors, and then take off the LCD
inverter board.
Fig. 5-13
(1) Take off the control panel unit.
P.5-12 "[A] Control panel unit"
(2) Remove 2 connectors of the LCD inverter
board.
Fig. 5-14
(3) Remove 2 screws and disconnect 2 shielding
wire, and then take off the bracket.
Note:
When assembling, be sure to install them in
the correct order.
Fig. 5-15
LCD inverter board
LCD inverter board
Shielding wire Shielding wire
To Next Page
Loading...
