Toshiba e-studio555 - Page 123

5
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
CONTROL PANEL
5 - 17
[E] LCD panel (LCD) / Touch panel (TCP)
[F] Control panel cover
(1) Take off the control panel unit.
 P.5-12 "[A] Control panel unit"
(2) Remove the DSP board.
 P.5-14 "[C] DSP board (DSP)"
(3) Remove 1 screw and take off the harness
clamp.
(4) Remove 2 screws and take off the LCD.
Fig. 5-22
(5) Take off the touch panel.
Notes:
1. When installing the touch panel, be sure
that the panel faces the right direction.
2. Be sure that no dust or stain is on the
LCD panel or the touch panel before the
installation.
Fig. 5-23
(1) Release the 4 latches, and take off the
control panel cover.
Fig. 5-24
LCD
Touch panel
Control panel cover
Latch
Latch