9
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
PROCESS RELATED SECTION
9 - 9
9.7 Disassembly and Replacement
[A] Main charger
(1) Take off the toner cartridge drive unit.
( P.11-12 "[A] Toner cartridge drive unit")
(2) Remove 3 screws and take off the left inner
cover.
(3) Remove 1 stepped screw and pull out the
main charger.
Fig. 9-6
(4) Press the button to release the tension of the
main charger grid, and then release the hook
to remove the grid.
Fig. 9-7
(5) Take off 1 finger and then the front terminal
cover.
Fig. 9-8
Main charger
Screw
Main charger grid
Button
Terminal cover
Latch
To Next Page
Loading...
