Toshiba e-studio555 - Disassembly and Replacement; Radf

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 14
15.5 Disassembly and Replacement
15.5.1 RADF
(1) Take off the top right cover, and rear cover
( P.2-42 "[C] Top right cover",
 P.2-45 "[L] Rear cover").
(2) Disconnect the connector.
Fig. 15-12
(3) Remove 2 screws.
Fig. 15-13
(4) Open the RADF and remove 2 screws.
Fig. 15-14