Toshiba e-studio555 - Page 341

15
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 23
(8) Remove 2 screws.
Fig. 15-39
(9) Take off the unit of exit guide and exit/
reverse guide.
Fig. 15-40
(10) Disconnect 2 connectors, remove 2 screws
and take off the reading end guide.
Fig. 15-41
(11) Remove 1 E-ring, 1 pulley, 1 pin, 1 timing
belt, 1 guide bushing and the bracket.
Fig. 15-42
Exit guide
Exit/reverse guide
Reading end guide
E-ringPulleyPin
Timing belt
Guide bushing
Bracket