Toshiba e-studio555 - Exit Roller

15
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 33
15.5.20 Exit roller
(6) Take off the reading end guide.
 P.15-22 "15.5.11 Exit guide / Exit/reverse
guide / Reading end guide"
(7) Take off the reading end roller.
Note:
When installing the reading end roller, refix
the loosened screw and tighten the belt
tension.
Fig. 15-70
(1) Take off the reading end guide.
 P.15-22 "15.5.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the guide.
Fig. 15-71
(3) Take off the exit roller.
Fig. 15-72