Toshiba e-studio555 - RADF Board (RADF); RADF Board Bracket

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 58
15.5.53 RADF board (RADF)
15.5.54 RADF board bracket
(1) Take off the RADF rear cover.
 P.15-16 "15.5.3 RADF rear cover"
(2) Disconnect 11 connectors. Remove 4 screws
and take off the RADF board.
Note:
When replacing the RADF board, be sure to
perform the original reading start sensor
adjustment.
SERVICE HANDBOOK “3.12.8 Original
reading start sensor adjustment“
Fig. 15-144
(1) Take off the RADF rear cover.
 P.15-16 "15.5.3 RADF rear cover"
(2) Disconnect 11 connectors.
Fig. 15-145
(3) Disconnect 1 connector. Take off the harness
clamp. Remove 4 screws and take off the
RADF board bracket.
Fig. 15-146
LED3
LED3