Toshiba e-studio555 - Page 385

16
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
POWER SUPPLY UNIT
16 - 7
+24VD2 PLG board Polygonal motor
(Only for e-STUDIO755/855 model)
M2 F5: 8A (Semi time-lag)
+24VD2 SLG board SLG board cooling fan M23 F5: 8A (Semi time-lag)
Lamp inverter board INV-EXP
+24VD2 Finisher F6: 8A (Semi time-lag)
+24VD4 RADF F7: 8A (Semi time-lag)
+36VD LGC board Fuser motor M3 F8: 8A (Semi time-lag)
Feed motor M20
+36VD LGC board Drum motor M11 F8: 8A (Semi time-lag)
Transfer belt motor M14
+36VD PLG board Polygonal motor
(Only for e-STUDIO555/655 model)
M2 F8: 8A (Semi time-lag)
+36VD SLG board Scan motor M1 F8: 8A (Semi time-lag)
+5VB LGC board Harnesses and sensors to be connected to
the LGC board
--- F9: 3.15A (Semi time-lag)
Voltage Board/unit Part Fuse type