Toshiba e-studio555 - Page 78

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 42
[C] Top right cover
[D] Top left cover
[E] Top rear cover
(1) Remove 1 screw and open the RADF.
(2) Slide the cover to the rear side to release the
hook, and then take off the top right cover.
Fig. 2-34
(1) Remove 1 screw and open the RADF.
(2) Slide the cover to the rear side to release the
hook, and then take off the top left cover.
Fig. 2-35
(1) Take off the RADF
( P.15-14 "15.5.1 RADF").
(2) Take off the top right cover
( P.2-42 "[C] Top right cover").
(3) Take off the top left cover
( P.2-42 "[D] Top left cover").
(4) Remove 2 screws to take off the top rear
cover.
Fig. 2-36
Top right cover
Top left cover
Top rear cover