Toshiba e-studio555 - Page 79

2
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
OUTLINE OF THE MACHINE
2 - 43
[F] Right upper cover
[G] Right center cover
[H] Right rear cover
(1) Take off the top right cover
( P.2-42 "[C] Top right cover").
(2) Remove 2 screws to take off the right upper
cover.
Fig. 2-37
(1) Open the bypass tray.
(2) Remove 8 screws to take off the right center
cover.
Fig. 2-38
(1) Remove 2 screws and take off the right rear
cover.
Fig. 2-39
Right upper cover
Right center cover
Right rear cover