e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 68
3.11 Process Related Section
3.11.1 Construction
This chapter describes the following unit regarding the image forming process.
• Main charger
• Charger wire cleaner
• Discharge LED
• Ozone filter
• Surface potential sensor
• High-voltage transformer
• Temperature/Humidity sensor
The drum/cleaner unit is described in chapter 3.13, the developer unit is described in chapter 3.14 and
the transfer/transport unit is described in chapter 3.15.
Fig. 3-41
Discharge LED
Main charger
Charger wire cleaner
Drum surface
potential sensor
Drum
To Next Page
Loading...
