Toshiba e-STUDIO556 - Reading Start Guide Unit

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 122
4.12.10 Reading start guide unit
(1) Take off the RADF rear cover.
( P.4-117 "4.12.3 RADF rear cover")
(2) Take off the original jam access cover.
( P.4-118 "4.12.4 Original jam access
cover")
(3) Take off the RADF left cover.
( P.4-119 "4.12.5 RADF left cover")
(4) Take off the RADF cooling fan.
( P.4-144 "4.12.30 RADF cooling fan
(FR1)")
(5) Remove 2 screws. Disconnect 2 connectors.
Fig. 4-343
(6) Remove 2 screws.
Fig. 4-344
(7) Remove 2 screws and take off the reading
start guide unit.
Fig. 4-345
Reading start guide unit