Toshiba e-STUDIO556 - Page 295

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 149
(3) Remove 1 screw and take off the switch
bracket.
Note:
Before taking off the switch, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
Fig. 4-423
(4) Remove 1 screw and take off the RADF
opening/closing switch.
Fig. 4-424
Note:
Be sure to install the switch so that the arm
comes to the upper side of the switch.
Fig. 4-425