4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 151
4.12.38 Original jam access cover opening/closing sensor (SR13)
4.12.39 Feeder lower guide unit
(1) Open the original jam access cover.
(2) Remove 4 screws and take off the sensor
bracket.
Fig. 4-429
(3) Disconnect 1 connector. Release 2 latches
and take off the original jam access cover
opening/closing sensor.
Fig. 4-430
(1) Take off the original tray.
( P.4-119 "4.12.6 Original tray")
(2) Take off the guide.
Fig. 4-431
Original jam access cover
opening/closing sensor
To Next Page
Loading...
