7
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
PREVENTIVE MAINTENANCE (PM)
7 - 7
• When the value of the output pages or the drive counts among the sub units (parts) is
different, “_” is displayed at the value section of the main unit and “CHECK SUBUNIT” is
displayed at the top.
• “—” is always displayed at the drive counts section for the reversing automatic document
feeder (RADF) and feed unit.
• The paper source differs depending on the structure of options, however, “0.0k” is displayed
in “OUTPUT PAGES (k)” and its standard number of output pages is displayed in “PM
OUTPUT PAGES (k)” even for the installed paper source.
To Next Page
Loading...
