Toshiba e-STUDIO556 - Page 667

8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 159
[2D68] File sharing service not available
Check if the setting of SMB is valid.
[2D69] NetWare service not available
When a user tried to perform Scan to File with NetWare protocol even though the NetWare setting is
disabled, a message notifies the user that NetWare service is disabled.
Check if the Netware setting is enabled.
[2DC1] Power failure
Check if the power cable is connected properly and it is inserted securely.
Check if the power voltage is unstable.
[2D69] NetWare service not available
[2DC1] Power failure
[2E10] USB storage system access abnormality
Classification Error item
File sharing related error When a user tried to perform Scan to File with NetWare protocol even
though the NetWare setting is disabled, a message notifies the user that
NetWare service is disabled.
Check item Measures
Setting
Check if the Netware setting is enabled.
Replace parts Remarks
Classification Error item
File sharing related error
Check item Measures
Setting
• Check if the power cable is connected properly and it is inserted
securely.
• Check if the power voltage is unstable.
Replace parts Remarks
Classification Error item
File sharing related error Job status is invalid.
Check item Measures
Setting
Turn the power OFF and then back ON. Perform the job in error again.
If the error still occurs, check that there is no job, and format the HDD with
[5] + [C] + [POWER].